Wash garments inside out, with zippers zipped and buttons or snaps closed. The yellow /white paper is the bottom and keeps the sticky side of the clear paper from coming in contact with unwanted surfaces until you are ready to press. For those manufacturers, a heat press machine can do the ironing more quickly and professionally. At this point, with care, the design can be repositioned if necessary.You may have seen one of those fashionistas in street, wearing a thin cotton shirt with a big pair of sunglasses. Turn the design upside down so that the yellow / white paper is on the top.
Now thanks to the rhinestone transfers, people can apply them to the clothes just with irons. Pealing from one corner toward the oposite corner is best, but do it SLOWLY. Use gentle cycle and cold water. Allow the transfer to be completely cool before SLOWLY removing the clear paper. For rhinestone desgins only or combination of glitter and rhinestones, use 350 degrees F for 10-15 seconds. With the clear paper on top (and the adhesive side down), place the design on the garment. What attracts you is the brightly shinning pattern of an afro lady, or a big skull on the bosom made of plenty of glittering crystal-shaped things. The top of the transfer has clear paper holding the rhinestones and other materials in place.
Tips and warnings A thin cloth can be used as a substitute buffer, instead of a teflon mat. Holding the clear paper with a finger or two, SLOWLY peal the yellow / white paper away from the clear paper. Separate a corner of the yellow / white paper from the clear. Skill level: Easy Instructions The design is "sandwiched" between 2 layers of paper, a clear layer and a yellow / white layer. These cool and pretty patterns are called "Iron-on Rhinestone Transfers" inside the industry. If there are sequins in the design, extend the time to 25-30 seconds at 350 degrees F. Good luck!. More often than not after a few washings you will have missing or loose stones as well.
But here I;m gonna focus on how to apply iron-on rhinestone transfers at home, just with a home iron. These crystal-shaped stones are rhinestones, which have special glues on the backs and get melted by heat so as to be sticky onto the fabrics. Warm water for whites but never hot. Cover the transfer with a clean teflon sheet and press with medium to firm pressure. As the paper is removed, examine the design to be certain that all parts optical frame manufacturers have bonded to the garment and none remain on the paper. Stop the removal process if anything has not bonded, and repeat. Because these transfer designs are pre-made, it saves workers; time to align and glue the rhinestones, which can lead to a mess when handle them to the garments.
